Pit Mat's and Assembly Trays Item Code: MR33-252013
MR33-252013 - MR33 NEOPIT Set with Car Stand and NeoPit Adapter
This set pairs the MR33 SIGNATURE 1:10 on-road car stand (MR33-252011) with the MR33 NeoPit adapter (MR33-252012), letting you mount SkyRC NEO tyre warmers (600157-01) right on your stand, ready to go at the track.
In summer, the NeoPit connects your MR33 car stand to the SkyRC NEO warmers in seconds. In winter, just take it off and use the stand on its own as normal.
The NeoPit also holds a 2S LiPo up to 25mm tall to power the warmers, so there's no need for a separate battery. Run from mains power on the bench, then plug in the LiPo and carry the whole unit to the track to keep your tyres warm right up to the start.
IMPORTANT: SkyRC NEO tyre warmers are NOT included.
Assembly
- Remove the four side M2 screws from the warmer station's housing.
- Fix the warmer station to the NeoPit using the four long M2 screws supplied. The hex driver fits through the openings in the NeoPit.
- Drop the MR33 car stand into the openings from above and secure it from underneath with the four M3 screws.
- Optional: fit a 2S LiPo (max. 25mm high) and lock it in with the two grub screws either side of the warmer station (don't overtighten). Plug an XT60 lead into the battery first, then connect it to the warmer station.
Contains: 1 x MR33-252011 SIGNATURE car stand, 1 x MR33-252012 NeoPit adapter